EM1401 / EM1401 UT EMA Thickness Gauge. Operation Manual.
+7(812) 385-54-28
37
Then, the window appearance will be as shown in the Figures below:
C-scan filling mode for "Matrix" test object
C-scan filling mode for "Pipe" test object
This window shows the A-scan, C-scan, current value of the measured
thickness, current coordinate, as well as the minimum thickness which was found
during the whole time of C-scan filling.
The current position is highlighted with blue square cursor on the C-scan. Prior
to the inspection start, this square cursor is at the point with coordinate (0.0).
