EM1401 / EM1401 UT EMA Thickness Gauge. Operation Manual.
+7(812) 385-54-28
25
Blue strobe selection
You can set the position and length of the blue strobe in the same way as those
of the red strobe by pressing the
,
,
, and
buttons. Upon selection of the
position and length of the blue strobe, press the
button.
Calibration
The calibration window appearance is shown in Figure below:
Calibration
The Calibration menu has three items:
Sensor This item is available when one of three piezoelectric transducers
is selected. The front cover of the Device includes the calibrations sample (see "Device
Appearance") The piezoelectric transducers shall be calibrated prior to operation start
