EM1401 / EM1401 UT EMA Thickness Gauge. Operation Manual.
+7(812) 385-54-28
12
Thickness measurement mode. Possible settings are as follows: auto, one
strobe and two strobes;
Averaging number used in the Device;
Selected acoustic speed;
Selected temperature of the test object;
Selected material of the test object;
When you press the
button, the window will be as shown in the figure
below:
Change of parameters
Within this window, you can change the applicable transducer, measurement
mode, averaging number, temperature as well as select the material of the test object
and perform calibration. To select the appropriate menu item, press on the
and
buttons. To change the selected menu item, press on the
button.
Transducer Selection
The figure below shows the transducer selection window.