EM1401 / EM1401 UT EMA Thickness Gauge. Operation Manual.
+7(812) 385-54-28
30
B-scan filling mode selection
You can select two options in this window: stand-by mode and continuous
mode. When the standby mode is selected, the B-scan will not be updated until the user
presses the
button. In this case, "Press + to start up" will be at the top of the Device
screen.
If the continuous mode of B-scan filling is selected, the B-scan will be filled
and updated continuously.
Screen Filling Time
This setting enables to increase or decrease time during which the B-scan in
fully filled. To select the B-scan filling time, select this item in the context menu and
press on the
button. The B-scan filling time selection window is shown in the
Figure below: