Oki OKIPAGE 12i Series, Service Handbook

Page: 74 / 226

3 - 26
3.3.20 M5E-PCB
(1) Remove the upper cover assy (see 3.3.1).
(2) Remove the operator panel assy (see 3.3.3).
(3) Remove the face up stacker assy (see 3.3.7).
(4) Remove the lower base unit (see 3.3.4).
(5) Remove the connector (2ndTRAY)
6
.
(6) Remove three screws
1
.
(7) Move the M5E-PCB
2
in the direction of arrow to disconnect it from the power supply/sensor
board
3
.
(8) Remove the connector FAN, and disconnect the fan motor
4
.
(9) Remove the M5E-PCB 2 , together with the PCB guide plate (remove the fan motor 4 at the
same time).
(10) Remove three screws 8 and remove the PCB guide plate 7 from the M5E-PCB 2 .
Note : When reinstalling the M5E-PCB 2 onto the guide plate 7 , be careful not to bend the
base plate (it is desirable to place a block underneath it to prevent bending).
3
4
2
8
1
7
6
8
1