Oki OKIPAGE 12i Series, Service Handbook

Page: 105 / 226

6 - 13
Table 6-1 (10/10)
Category
LCD status message
Problem or status
Remedy
Daily status (continued)
–
To clear, press
RECOVER
key when "CLEARABLE
WARNINGS=ON" is being selected in the menu.
–
Check the host program.
Normal operation. –
Check the printer setting of the host.
–
Check the printer job data to see if there is any unsu- poorted or illegal operation in the data.
NO PS PWR SAVE ERROR PS AdobePS CHG DRUM EEPROM RESET'NG ROM-SIMM ERROR
Unavailable printer language was designated by PJL com- mand (warning). The printer is in the power -saving mode. This message is displayed together with another mes- sage on the first line. PostScript mode only. This message appears when the interpreter detects an er- ror while a job is being processed. The remainder of the job is ignored. Informs drum life end. It can be temporarily released by opening and closing the cover or pressing the “ON LINE” switch, but basically, the drum must be replaced. Indicates an error from the result of checking EEPROM ID No. The printer will display this for a few seconds and re- set the EEPROM to the factory default for a continuous operation. It will occur with a new EEPROM. Reformat error including CPCMCIA header of ROM-S- IMM and byte sum. It will be displayed for 2 seconds at power-on or just be- fore a shift to ON LINE.
(PS Only)