Oki OKIPAGE 12i Series, Service Handbook

Page: 96 / 226

6 - 4
Table 6-1(1/10)
Category
LCD status message
Problem or status
Remedy
Controller errors
–
Normal operation cannot be ensured. Turn the power off, then back on to restart.
–
If normal operation is not recovered by this restart procedure, replace the main control board.
ERROR On aaaaaaaa
Code
(nn)
Error
1~3
D~F
4 5 6 7 8 9 A B
C
Reserved Address Error Exception (Load command, command fetch) Address Error Exception (Store command) Bus Error Exception (Command fetch) Bus Error Exception (Load command, store command) System Call Extension Break Point Exception Reserved Instruction Exception Coprocessor Unusable Exception Arithmetic Overflow Exception
An error occurred in the controller. n = Exception Code aaaaaaaa = Error Address