Oki OKIPAGE 12i Series, Service Handbook

Page: 97 / 226

6 - 5
Table 6-1 (2/10)
Category
LCD status message
Problem or status
Remedy
Controller errors (continued)
–
Turn the power off, then back on to recover from the error.
–
If normal operation is not recovered by this restart procedure, use the following remedial actions.
ERROR nn
Code
(nn)
Error
10 20 30 40 50 51 52 53 60 61 70
An error was detected by program ROM check. An error was detected by font ROM check. An error was detected by resident RAM check. An error was detected by EEPROM check. An error was detected by PS program ROM check. An error was detected by Flash SIMM. PS only can't happen. PS only undefined sys call. An error was detected by optional RAM check. Data bus Error between Cas and Data bus for option DRAMs. A failure occurred with the Fan motor.
Remedy
Replace the main control board. Replace the main control board.(Can't Happen) Replace the main control board. Replace the EEPROM or main control board.
Replace the main control board. Check the optional Flash SIMM for proper connection or replace it.(Can't Happen)
–
Check the optional RAM board for proper connection.
–
Check the mounting position of short plugs and addi- tional RAM chips (see Section 7.4).
–
Replace the optional RAM board.
Check the optional DRAM SIMM for proper connection or replace it.
–
Check the fan motor for proper connection and for any presence of foreign matter in the fan (see Section
6.5.-
2-
6
).
–
Replace the fan or the main control board.
An error occurred in the controller.