Oki OKIPAGE 12i Series, Service Handbook

Page: 161 / 226

D - 2
(5) Operator Panel Menu Disable
• This function is for enabling and disabling the operation panel menu functions (Menu 1,
Menu 2, Tray Select, Copies and Paper Size).
OP MENU
DISABLE
DRUM CNT
RESET'NG
X ADJUST
+0.25mm
ON-LINE
HEX DUMP
ON-LINE
XXX
USER MNT
HEX DUMP
DRUM CNT
RESET
OP MENU
ENABLE *
X ADJUST
0mm *
LCD display
Press the
MENU key.
Press the
MENU key.
Press the
MENU key.
REC BUF
Press the
MENU key.
Press the
ENTER key.
MENU
RESET
Press the
MENU key.
Press the
MENU key.
Press the
ENTER key.
After the completion
of processing
Writing into the EEPROM is performed after pressing the
ENTER key. Press the ON LINE key if you wish
to get out of this mode.
Y ADJUST
0mm *
Press the
MENU key.
Press the
ENTER key.
Press the
or key.
MENU
RESET'NG
Press the
ENTER key.
X ADJUST
+0.25mm
2ND TRAY
1
PLACE PG
LEFT
ON-LINE
XXX
After the completion
of processing
Writing into the EEPROM is performed after pressing the
ENTER key. Press the ON LINE key if you wish to get out of
this mode.
(Range of Adjustment: +2.00mm to -2.00mm; 0.25mm steps)
Writing into the EEPROM is performed after pressing the
ENTER key. Press the ON LINE key if you wish to get out of
this mode.
(Range of Adjustment: +2.00mm to -2.00mm; 0.25mm steps)
In the feeding destination selecting command (ESC&I#H) for
PCL5 Emulation, # designated for 2nd Tray is set.
As compared with mechanical setting position of paper being a
center alignment, a printing image is moved in accordance with
the left alignment which is the same as HP (canon).
Enable only for PCL.
Press the
or key.
Press the
or key.
Press the
or key.
AUTO
8KB
20KB
50KB
100KB
1MB
Setting of receiving buffer.
If you select a large value, the data transmitting time from
PC will be shortened, but Memory Overflow become easy
to happen.
Press the
or key.
RSRC SAV
AUTO
OFF
200KB
400KB
800KB
1.2MB
1.8MB
2.4MB
8.4MB
9.8MB
11.2MB
Press the
or key.
2ND TRAY
5 *
PLACE PG
CENTER *
INITIAL-
IZING
ON LINE
XXX
Press the
MENU key.
Sets the size of area where, at switching either of PCL
and POSTSCRIPT to the counterpart, environment such
as permanent DLL and MACRO can be saved for the
switched part, and when it is returned, the saved envi-
ronment can be recalled.
Enable only when PS additional memory is con-
nected and cable of obtaining 10% assignment to the
size of additional memory which is installed when this
setting is selected.
Press the
MENU key.
0 *
+ 1
+ 2
- 1
- 2
Press the
or key.
SETTING
0 *
(Note1)
Note1) For Ver.1.18 F/W, "SETTING" menu item
is in the Engine Maitenance mode.