Oki OKIPAGE 12i Series, Service Handbook

Page: 164 / 226

D - 5
1.3 Engine Maintenance Mode
• The engine maintenance mode is activated when the power is turned ON while keeping the
FORM FEED key and ENTER key pressed down.
• This mode adopts the menu for function selection.
• The method for exit from this mode depends on the setting.
• The engine maintenance mode provides the following functions:
(1) Head Drive Time Setting
• Sets the drive time of the LED head.
(2) Type
• Do not change the default setting.
(3) Printing Start Position Setting
• Sets the printing start position.
(4) Drum Count Total Display
• Displays on the LCD the total number of drum revolutions of the unit, counted at the
engine block.
(5) Drum Count Display
• Displays on the LCD the total number of EP drum revolutions counted at the engine
block.
(6) Factory Adjustment (for High Capacity Second Paper Feeder/Power Envelope Feeder)
• Do not change the default settings since these are factory settings and were set at the
factory.
(7) Engine Reset
• All EEPROM areas used by the engine block are reset to factory default values.
• The following items are excluded:
Menu level-1
Menu level-2
Operator panel menu disable/enable
Page print disable/enable
• Transition to the operation mode occurs upon completion of resetting.