Oki OKIPAGE 12i Series, Service Handbook

Page: 56 / 226

3 - 8
3.3.2 LED Head
(1) Press the knobs on left and right sides and open the stacker cover assy 1 .
(2) Open the hook section on the left side of the stacker cover and remove the LED head 2 .
Note: • Be sure not to touch directly or push on the SLA part of the LED head.
• Do not remove the LED cable
3
from the connector.
• Remove connector
4
and cable
3
together as an assembly from the LED head.
• After mounting the new LED head and resinstalling the cable, set drive time of the
LED head according to the marking on the LED head (see 4.2.1).
1
2
4
SLA
SLA
(Seltoc Lens Array)
3