Oki OKIPAGE 12i Series, Service Handbook

Page: 104 / 226

6 - 12
Table 6-1 (9/10)
Category
LCD status message
Problem or status
Remedy
Daily status (continued)
Normal operation. Replace the toner cartridge. Replace the power supply/sensor board. –
Replace the image drum cartridge.
–
After replacing the drum cartridge, reset the drum counter (refer to the Printer Handbook).
RESET TO SAVE TONERLOW TONERSNS TONEREMP TONEREMP CHG CART CHG DRUM
This message is displayed when the printer cannot reset automatically to exit from the menu because there are date and DLL's and macros having temporary attributes when the printer is changed from set mode to another mode. Toner is running out.
This message is displayed together with another message on the first line.
Normal operation can be continued. A fault occurred with the toner sensor.
This message is displayed together with another message on the first line.
Normal operation can be continued. Displays that the amount of toner is near empty (this sta- tus will appear after 100 sheets from a TONER LOW indi- cation). It is indicated by being combined with other messages in the first line. Normal operation can be continued. Displays that the amount of toner is near empty. After 100 sheets from a TONER LOW indication, this sta- tus will appear and the printing be stopped. If pressing ON-LINE SW, other 31 sheets can be printed and stopped. And from the next time on, the printing is stopped each sheet. This message is displayed together with another mes- sage on the first line. Normal operation can be continued.