Oki OKIPAGE 12i Series, Service Handbook

Page: 102 / 226

6 - 10
Table 6-1 (7/10)
Category
LCD status message
Problem or status
Remedy
Daily status (continued)
Normal operation.
PRINTING DATA emulate PRINT FONTS PRINT MENU INITIAL- IZING FMLODING
The printer is printing a page. The printer is processing data in the on-line mode.
Ready ON :
The data that is not printed remains in the
buffer.
Ready flashing :
The printer is receiving data or in printing
process.
emulate : AUTO, PCL, PPR, FX, AdobePS, HEX All fonts of the printer are being printed during self-test. The current menu setting is being printed.
Ready ON :
Executed by command entry.
Ready flashing :
Executed by key operation.
Message displayed when the power is turned on. When the power is turned on, the LEDs are turned on for approximate- ly 1 second, conducting a test to verify the conditions of the LEDs and LCD. Message displayed to indicate that the controller is undergo- ing an initialization when the power is turned on. This message is displayed after the turning on of the LEDs as described above. Indicates in Cold mode due to downloading to flash memory.