Oce CS7400 Series, User Manual

Page: 18 / 122

1-10 Important Operating Notes
Safety Warnings
• UV light — the ultraviolet (UV) curing lamps emit high power
UV light. The printer must be operated with all safety shield-
ing installed to protect the operator from eye and skin dam-
age. When operated according to manufacturer’s
instructions, safety glasses or other protective clothing are
not necessary.
• Mechanical hazards — Keep fingers away from carriage
and media path. Do not exceed the maximum weight load of
the input or output tables, as printed on the label.
• Ink — read and practice safety guidelines as outlined in the
Material Safety Data Sheet (MSDS) for the ink, and post the
document in the work area as required by prevailing law.
Avoid any contact with skin and eyes. Provide adequate
general and local exhaust ventilation. Avoid breathing
vapors. Respirator protection may be required under excep-
tional circumstances when excessive air contamination
exists. None of the component substances have established
exposure standards per OSHA, NIOSH or ACGIH.
• Electrical — WITH THE POWER SWITCH IN THE OFF
POSITION, POWER MAY STILL BE SUPPLIED TO THE
PRINTER COMPONENTS. To completely cut power from
the printer, you must unplug the power cord from the power
outlet.
• Ozone — the high power UV light emitted by the curing
lamps reacts with oxygen and produces ozone. This forma-
tion tends to be greatest during lamp start-up. The printer
should be operated in a well-ventilated area to avoid minor
effects such as headaches, fatigue, and dryness of the
upper respiratory tract. Normal air movement will mix the
ozone with fresh air, causing it to revert back to oxygen.
• Hazardous waste — THE PRINTER ELECTRONICS
ASSEMBLY CONTAINS A LITHIUM BATTERY DEVICE.
THERE IS A DANGER OF EXPLOSION IF THE BATTERY
IS INCORRECTLY REPLACED. The battery must be
replaced only by authorized service providers, and must be
replaced only with the same or equivalent type. Dispose of
this lithium battery device in accordance with local, state (or
province), and Federal (or country) solid waste require-
ments.