Load and Print on Rigid Media
2-13
After briefly displaying the measured width of the media, the
control panel displays the media and margin measurements
(see Fig. 2-6):
•
To change the margins, press the
Margin Settings
key.
Note
The minimum Trailing Margin is 6 inches (15.2 cm),
to enable the pinch rollers to advance the media.
14.
Press the
(Proceed) key.
The control panel displays the message, “Media loaded suc-
cessfully,” and asks whether to save the Media Feed Num-
ber (MFN) for the current media type.
•
To load the new MFN, press the
9
(Yes) key.
•
To discard the new MFN and used the previously-saved
MFN, press the
(No) key.
•
To perform a media feed calibration or enter a different
MFN, press the
Calibrate Media Feed
key (For
instructions, see “Media Feed Calibration” on page 4-9.)
The Front Page screen appears.
15.
Press the
Go Online
key.
Fig. 2-6. Rigid sheet measurements
Summary of Contents for CS7400 Series
