Oce CS7400 Series, User Manual

Page: 93 / 122

Manual Calibrations 4-21
Clear Individual Bad Jets
When you select Clear Individual Bad Jets, the control panel
displays the following prompt:
Head 1:
Press Proceed to clear a bad jet.
10. Press

and

to select a head number, then press

(Proceed).
The control panel displays a numeric keyboard that you can
use to enter the number of the bad jet.
11. Enter the jet number, then press the Enter key.
12. When you are finished entering jet numbers, press the Esc
key.
The control panel displays the head selection message
again.
13. Press

and

to select the next head number, then press

(Proceed).
14. Repeat steps 11 through 13 for each head containing bad
jets you want to clear.
15. When you are finished clearing bad jets, press

.
The control panel displays the previous menu.
View Current Bad Jets
When you select View Current Bad Jets, the control panel
displays the following prompt:
Head 1:
Press Proceed to view bad jets.
16. Press

and

to select a head number, then press

(Proceed).
The control panel displays a message that lists the bad jets
by number.
17. Press

to return to the head selection screen.