Oce Arizona 500, User Manual

Page: 59 / 156

Copies/Reprints
7/26/04 4-5
The entire menu structure can be printed using the Print Menu Tree function (see “Print
Menu Tree” on page 4-13).
0.3
Copies/Reprints
This menu (see “Copies/Reprints Menu” on page A-2) controls the number of copies and
specifies the spacing between copies made during each print job. You can also reprint copies
of a previous printed image. An on-board hard drive enables multiple images to be saved
and accessed through the control panel without reprocessing and resending the print from
the processing workstation.
0.3.1
Reprint Copies of a Previously Printed Image
Copies of a previously printed image can be reprinted using the following steps:
1. Navigate to:
MAIN MENU
copies/reprints
2. Press the ACCEPT button. You then see:
COPIES/REPRINTS
[XX] job name
Use the +/- buttons to select a previously printed image.
3. Press ACCEPT. You then see:
COPIES/REPRINTS
position: (right, center, or left)
Use the +/- buttons to select the required position.
4. Press ACCEPT. You then see:
COPIES/REPRINTS
# reprints: XXX
Use the +/- buttons to select the total number of copies (1-300). If multiple copies
are selected, go to step 5. If one copy is selected, go to step 6.
5. Press ACCEPT. You then see:
SPACING
vert=(0.00 - 0.20" to 8.98 - 9.18")
Use the +/- buttons to set the vertical spacing amount in inches between images.
6. Press ACCEPT. The selected image begins printing.