Oce Arizona 500, User Manual

Page: 40 / 156

Océ | Media System
3-14
3.3.3
Take-up Roll Reattachment
Follow these steps to remove a full/partial take-up roll and reattach media to a new empty
take-up core:
1. Press the Load Media button. You then see:
Load Media
new supply roll?
2. Press the Menu button. You then see:
Load Media
reattach takeup?
3. Press the ACCEPT button. You then see:
Use +/- keys, attach
takeup, press ACCEPT
The take-up dancer moves automatically up and out of the way.
4. To unload the full or semi-full roll of images, gently open the front door completely.
5. Cut the media attached to the take-up roll along the take-up dancer and remove the
take-up mandrel from the printer (see Figure 3-13).
Figure 3-13 Cutting Media Above Take-Up
Note:
Avoid cutting into the black rubber drive roll.