Oce Arizona 500 User Manual Download Page 3

Page: 3 / 156

Copyright and Trademarks

7/26/04

iii

0.1

Copyright and Trademarks

© 2004 Océ Display Graphics Systems. All rights reserved.
This document contains information proprietary to Océ, to its subsidiaries, or to third

parties to which Océ may have a legal obligation to protect the information from

unauthorized disclosure, use, or duplication. Any disclosure, use, or duplication of this

document or of any of the information contained herein for other than the specific purpose

for which it was disclosed is expressly prohibited, except as Océ may otherwise agree to in

writing. Due to continuing research and product improvements, features or product

specifications may change at any time without notice.
Arizona 500 and ColorBlend are trademarks of Océ Display Graphics Systems. PosterShop

is a registered trademark of Onyx Graphics, Inc.
Plexiglas is a registered trademark of R

hm GmbH & Co.

Centronics is a registered

trademark of Centronics Data Computer Corp.
Teflon is a registered trademark of E.I. DuPont Corp.

0.2

Current Document Version

Date

Release

Doc. Number

Revision

Summary

11-7-02

Production

3012000918

Engineering Services/
Technical Publications

11-22-02

Production

3012000918

Miscellaneous changes

12-6-02

Production

3012000918

Miscellaneous changes

2-22-03

Production

3012000918

Firmware 2.1 and
miscellaneous changes

6-18-03

Production

3012000918

Firmware 2.2 and
miscellaneous changes

7-26-04

Production

3012000918

Firmware 2.2 and
higher, additional printer
maintenance (Chapter
5), and miscellaneous
changes

Summary of Contents for Arizona 500




























































































































































Search results

Summary of Contents for Arizona 500

Reviews:

Related manuals for Arizona 500

Brands by name

Popular brands

Oce Arizona 500, User Manual

Search results

Summary of Contents for Arizona 500

Reviews:

Related manuals for Arizona 500

Brands by name

Popular brands