Oce 31x5E, Configuration And Maintenance Manual

Page: 31 / 156

Configuration management 31
Defining the reset time for settings
The reset time specifies the length of time that must pass before the copier will
return to the default settings on the operating panel. Once started, a timer keeps
counting down as long as the copier is idle and there is no user interaction (such
as pressing buttons, opening doors or placing originals). The timer starts over
in response to each new user action.
The reset time is 60 seconds by factory default, but can be changed to any other
time between
10 seconds and 5 minutes.
When ‘No reset’ is selected, the settings remain valid until a user explicitly
resets them by means of the correction button.
▼
Changing the reset time for settings
1
Access the key operator system (see page 14).
2
Open the ‘Machine’ section.
3
In the ‘Basic’ subsection, press the ‘Reset-time settings’function button.
[15] ‘Reset time settings’ function
4
Use the arrow buttons to enter the reset time (between 10 and 300 seconds), or
select ‘No reset’.
5
When ready, exit the key operator system.