Oce 31x5E, Configuration And Maintenance Manual

Page: 140 / 156

140 Océ 31x5E Configuration and special maintenance
EPA E
NERGY
S
TAR
®
Océ-Technologies B.V. has joined the E
NERGY
S
TAR
® Program of the United
States Environmental Protection Agency (EPA). The purpose of the E
NERGY
S
TAR
® Program is to promote the manufacturing and marketing of
energy-efficient equipment, thereby potentially reducing combustion-related
pollution.
The Océ 31x5/31x5E DC is an Upgradable Digital Copier, the Océ
31x5/31x5E NC is a Multifunction Device.
As an E
NERGY
S
TAR
® Partner, Océ-Technologies B.V. has determined that
these machines meet the E
NERGY
S
TAR
® guidelines for energy efficiency,
exept the Océ 3145/3145E which has the same energy efficiency features, but
does not meet the E
NERGY
S
TAR
® Tier2 requirement for low power mode.
The E
NERGY
S
TAR
® Criteria involve the feature mentioned below. The use of
power management features prevents unnecessary power consumption and
offers economical and environmental benefits.
low power
The Océ 31x5/31x5E DC and NC automatically enter the low
power mode 15 minutes after the last copy/print is made.
1
The low power
default time can be adjusted by the key operator to an interval between 1 and
15 minutes.
sleep mode
The Océ 31x5/31x5E NC automatically enters the sleep mode 90
minutes after the last copy/print is made.
1
The sleep mode default time can be
adjusted by the key operator to an interval between 10 and 90 minutes.
auto-off
The Océ 31x5/31x5E DC automatically enters the auto off mode 90
minutes after the last copy is made.
1
The auto off mode default time can be
adjusted by the key operator to an interval between 10 and 90 minutes.
If the default times mentioned above cause an inconvenience, you can request
the service technician to increase the limit to a maximum of 240 minutes. It is
suggested that you determine the appropriate default time for your work
pattern by changing the setting in increments of 30 minutes and testing each
setting for at least a week.