Oce 31x5E, Configuration And Maintenance Manual

Page: 2 / 156

Copyright
Océ-Technologies B.V. Venlo, The Netherlands © 2001
All rights reserved. No part of this work may be reproduced, copied, adapted,
or transmitted in any form or by any means without written permission from
Océ.
Océ-Technologies B.V. makes no representation or warranties with respect to
the contents hereof and specifically disclaims any implied warranties of
merchantability or fitness for any particular purpose.
Further, Océ-Technologies B.V. reserves the right to revise this publication and
to make changes from time to time in the content hereof without obligation to
notify any person of such revision or changes.
Edition 5.0
Océ-Technologies B.V.
US
This manual contains a description of the tasks which can be performed by the
person in charge of the Océ 31x5E. The introduction (chapter 1) contains a
general description of the tasks for configuring and maintaining the copier and
how to access the key operator mode. It is, however, recommended that you
first read the Océ 31x5E Copy Jobs and Daily Maintenance manual and the
Print Jobs and Job Management manual.
Key to the copier and operating panel
To assist you in finding the parts of the copier and the functions on the
operating panel quickly, an illustration of the Océ 31x5E appears on the inside
front cover, and an illustration of the operating panel appears on the inside back
cover; both of these can be folded out.
Safety information
This manual contains the following safety information:
■
Appendix A lists ‘Instructions for safe use’. You are advised to read this
information before you start to actually use the copier. Technical safety
information such as safety data sheets can also be found in appendix A.
■
Where applicable, cautions and warnings are used throughout this manual to
draw your attention to safety precautions to be taken.