Oce 31x5E, Configuration And Maintenance Manual

Page: 108 / 156

108 Océ 31x5E Configuration and special maintenance
Restarting the DAC
If the DAC does not seem to function any more, you will need to reboot it with
the ‘Restart DAC’ function from the operating panel or using Print Logic. The
DAC will shut down and start again automatically. Unfinished print jobs at
shutdown time will be recovered.
[87] ‘Restart DAC’ function
Attention:
Do not attempt to reboot the DAC by turning it off and on again
or by using the reset button on the DAC.
▼
▼ ▼
▼
Restarting the DAC at the operating panel
1
Access the key operator mode (see ‘Accessing the key operator system using
the operating panel’ on page 14).
2
Open the ‘Printing’ section and select ‘DAC control’.
3
Press the ‘Restart DAC’ function button.
4
Press ‘Start’ ( ) to confirm.
5
Exit the key operator mode.
▼ ▼ ▼ ▼
Rebooting the DAC from a PC using Print Logic
1
Access the key operator system (see ‘Accessing the key operator system using
Print Logic’ on page 15).
2
Click the ‘Status’ tab.