Océ CS9360, Operation Instructions Manual

Page: 60 / 134

CS9350 OPERATION MANUAL
3-60
NOTE

To start printing during warming up, press [Enter] while “Warming Up Skip -> E” is
displayed.
4.4.7 Start Printing during Warm up

An Adjust print pattern for print quality adjustment is printed after warming up.
Six micro adjustment patterns will be printed. Input setting value for each pattern.

Regarding adjust print patterns, the same patterns are printed repeatedly on both edges
and the centre of the paper.
Step 4:
Check the both ends and the centre of the print result that printed with Adjust pattern, and
select the number from 1 to 7 that is not out of alignment.

“3” is selected in the next printing sample of “Micro Adjustment Pattern A”.

“5” is selected in the next printing sample of “Micro Adjustment Pattern B”.

“6” is selected in the next printing sample of “Micro Adjustment Pattern F”.
NOTE

“4” is the current setting value.
Step 5:
“PatternA: 4" is displayed.