Océ CS9360, Operation Instructions Manual

Page: 48 / 134

CS9350 OPERATION MANUAL
3-48
Standard Micro Adjustment Pattern
Check the confirmation pattern, and when the misalignment is small, perform micro adjustment.
Print a micro adjustment pattern and register the setting value.
Step 1:
Display the Adjust Print menu in the same way as in step 2 of “3.6.1.1 Standard Confirmation
Pattern”
Step 2: Press [+] or [-] to select “Adj.3: Fine Pattern”.
Step 3: Press [Enter].

“Warming Up”, and then “Warming Up Skip -> E” are displayed.
NOTE

To start printing during warming up, press [Enter] while “Warming Up Skip -> E” is
displayed.
4.4.7 Start Printing during Warm up

A confirmation pattern for print quality adjustment is printed after warming up.

Regarding adjust print patterns, the same patterns are printed on both edges and the
centre of the paper.