Océ CS9360, Operation Instructions Manual

Page: 89 / 134

CS9350 OPERATION MANUAL
4-89
Step 11:
Firmly pinch the tabs on both sides of the connector cap with your fingers, pull the connector
cap forward to remove it from the print head.
Step 12: Press the release buttons on both sides of spectrophotometer, install it to the connector at the
print head.
NOTE

Make sure that spectrophotometer is NOT installed at an angle, and that there in no gap
between the connector and spectrophotometer.
N° Name
1 Connector cap
2 Tabs
3 Print head section
N° Name
1 Spectrophotometer
2 Release buttons
3 Print head section
4 Connector
1
1
2
2
3
4
1
1
2
3