Océ CS9360, Operation Instructions Manual

Page: 63 / 134

CS9350 OPERATION MANUAL
3-63
Step 4:
Check the both ends and the centre of the print result that printed with Adjust pattern, and
select the number from 1 to 7 that is not out of alignment.

“6” is selected in the next printing sample.
NOTE

“4” is the current setting value.
Step 5:
“PatternA: 4" is displayed.
Step 6:
Press [+] or [–] to enter the number that you selected in Step 4.
NOTE

When you press [Cancel], “Adj.4: Fine PatternA” is displayed.
Step 7: Press [Enter].

The value is set in the “Pattern A: *” (* indicates a number from 1 to 7).

Press [Enter] to register the setting value for “Fine PatternA” to the printer.

The operation panel display returns to “Adj.4: Fine PatternA”.