Océ CS9360, Operation Instructions Manual

Page: 26 / 134

CS9350 OPERATION MANUAL
3-26
3.2 Loading media
NOTE

Refer to the chapter “Media” for more information on how to handle media.

For details of the recommended media, contact your local Océ representative or contact
the Océ MediaGuide
http://www.mediaguide.oce.com.
3.2.1 Loading roll media

The following roll media can be loaded on the scroller included with the printer.

Media tube with a diameter of three inches: Less than 150mm in outer diameter, less than
19kg in weight

Media tube with a diameter of two inches: Less than 150mm in outer diameter, less than
19kg in weight
CAUTION

When loading the roll media, place it on a flat surface such as a desk.
If the roll media is loaded with the scroller up, the scroller may be damaged.
Step 1:
When using the roll media with the media tube width of two inches, remove the attachments
for three-inch media from the movable media stopper and fixed media stopper.
Step 2: To set the roll media on the scroller, make sure that the paper is rolled counter-clockwise
when seen from the fixed media stopper.
N° Name
1 Movable media stopper
2 Fixed media stopper
3 Attachments for three-inch media
2
3
3
1