4
5
CLEANING THE NUTRIBULLET
Everyone hates cleaning up, which is just one more reason the NUTRIBULLET
is such a wonderful time saver.
WARNING:
ALWAYS UNPLUG THE NUTRIBULLET WHEN CLEANING OR ASSEMBLING.
Washing the NUTRIBULLET
Cleaning the
NUTRIBULLET
is so easy… simply place any of the pieces (except for
the Power Base and blade holders) on the top shelf of the dishwasher or hand wash
with warm soapy water and rinse.
WARNING:
DO NOT WASH THE BLADES IN THE DISHWASHER. THE NUTRIBULLET CUPS CAN
BE WASHED IN THE DISHWASHER AND SHOULD BE WASHED ON THE TOP RACK OF
THE DISHWASHER USING THE NORMAL (NOT SANITIZE) CYCLE. THE
NUTRIBULLET CUPS AND BLADES SHOULD NOT BE STERILIZED IN BOILING WATER
FOR ANY REASON AS THIS WILL WARP THE PLASTIC.
STUBBORN CLEANUP
If ingredients dry inside the
NUTRIBULLET,
make your clean up a snap by filling the
cup about 2/3 full with warm soapy water and screw on the Milling Blade. Place the
cup assembly on the
NUTRIBULLET,
Power Base for about 20-30 seconds. That will
loosen the stuck ingredients and with a light scrub, you’ll be all done.
CLEANING THE NUTRIBULLET POWER BASE
For the most part the Power Base doesn’t really get dirty, but if you neglect to twist
the blade on to the cup tightly, liquids can leak out and get into the base and activa-
tor buttons.
Here’s how to clean it up.
Step 1:
The most important thing is to UNPLUG the Power Base!
Step 2:
Use a damp rag to wipe down the inside and outside of the Power Base.
• NEVER SUBMERGE THE POWER BASE IN WATER OR PLACE IT IN THE
DISHWASHER.
• Never put your hands or utensils near the moving blade and never use your
hands or utensils to press the activator buttons down while the Power Base
is plugged in.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
