NUANCE OMNIPAGE PRO, Manual

Page: 11 / 58

Setting Up Your Scanner With OmniPage Pro
Installation and Setup 2-3
6 Follow the onscreen instructions and insert the other
installation disks as prompted.
To install OmniPage Pro on Windows NT 3.51:
1 Start Windows NT and open the Program Manager.
2 Insert OmniPage Pro disk #1 in your computer’s floppy disk
drive.
3 Choose Run in the Program Manager’s File menu.
4 Type
a:\setup
(or
b:\setup
) in the Command Line text box
and click OK .
5 Follow the onscreen instructions and insert the other
installation disks as prompted.
Setting Up Your Scanner With OmniPage Pro
You must install the Scan Manager and select your default scanner if you
plan to scan with OmniPage Pro. You are prompted to install the Scan
Manager during OmniPage Pro installation, but you can also install it at
a later time.
Be sure your scanner is connected, compatible with your system, and
runs with the software provided by the manufacturer
before you use it
with OmniPage Pro. See “Scanner Setup Issues” on page 5-8.
To install the Scan Manager at a later time:
1 Click Start in the Windows 95 taskbar and choose
Settings Control Panel .
2 Double-click Add/Remove Programs .
3 Click the Install/Uninstall tab and click Install... .
4 Insert the Scan Manager disk in your computer’s floppy disk
drive and click
Next
.
The Setup program starts.
5 Click Next and follow the onscreen directions to install and
select your default scanner.
Once the Scan Manager is installed, you can change the default
scanner anytime.