NUANCE OMNIPAGE PRO, Manual

Page: 10 / 58

System Requirements
2-2 Installation and Setup
System Requirements
You need the following setup to install and run OmniPage Pro:
• Computer with an 80386 or higher processor
• Microsoft Windows 95 or Windows NT 3.51
Please see the Release Notes for the most up-to-date information
on features supported by Windows NT 3.51 and later versions.
• Windows-compatible mouse
• Total system memory of at least 8MB RAM for Windows 95 and
12MB RAM for Windows NT
• 15MB free hard-disk space
• SVGA or VGA monitor
• A compatible scanner if you plan to scan documents
Be sure your scanner is connected, compatible with your system,
and runs with the software provided by the manufacturer
before
you install OmniPage Pro.
To use OmniPage Pro, you should know how to work in the Microsoft
Windows environment. Please refer to Windows 95 documentation or
online help if you have any questions about working in Windows 95.
Installing OmniPage Pro
OmniPage Pro’s Setup program takes you through installation with
onscreen instructions at every step. For best results, do not run any other
programs — especially anti-virus programs — during installation.
To install OmniPage Pro on Windows 95:
1 Click Start in the Windows 95 taskbar and choose
Settings Control Panel .
2 Double-click Add/Remove Programs .
3 Click the Install/Uninstall tab and click Install... .
4 Insert OmniPage Pro disk #1 in your computer’s floppy disk
drive and click
Next .
The Setup program starts.
5 Click Next to continue with installation .