NTT docomo FOMA D701I, Manual

Page: 86 / 517

Making
/Receivin
g
Vid
e
o-pho
ne C
a
lls
83
Switching from a video-phone call to a voice call
You can switch to a voice call by operating from the submenu during a video-phone call when the
other terminal is compatible with switching a call. Switching can be performed only from the
terminal which made the video-phone call.
･
This operation can be performed during a call between the terminals that support switching between
voice call/video-phone call.
･
To switch to a voice call, the other party needs to set
Indication ON
of Indicate V-phone in advance.
☛
P91
1
Press
m1
during a video-phone call and select
YES
.
･ The guidance notifying that the call is switched is played while switching the call.
･
Select
NO
to return to the video-phone talking screen.
･
You can switch to the call using the speakerphone function by pressing
n
while switching the
call.
● A video-phone call is not available to the terminals not supporting the video-phone function, or to the
terminals that are turned off or located outside the service area. If you set
Voice call auto switch
to
ON
and
attempt to make a video-phone call with an unsupported device, the other party will abort the communications
before connected. For this case, voice call redialing will automatically begin. The redialing function cannot
work as written above if you call an ISDN-sync 64 kbps or PIAFS access point, or an ISDN video-phone
incompatible with 3G-324M (as of August, 2005), or if you dial the wrong number. Note that some calls may
require the call charge.
● If a pause or timed pause is entered, dialing before the pause and the timed pause is made and all the
phone numbers entered after the pause or timed pause are ignored.
● You can switch to show/hide the caller ID when making a video-phone call.
☛
P58
● When there is an incoming call during dialing or redialing a video-phone call, the dialing may be interrupted
and the ring tone may sound.
● Incoming calls during a video-phone call
☛
P466
● Even if sending/receiving the voice or image is aborted and (only voice) or (only image) is displayed
during a video-phone call, the call may be continued as it is.
● If the radio wave conditions are poor during a video-phone call, the image may be displayed as mosaic.
INFORMATION
● For precautions when switching between a voice and video-phone call, see INFORMATION in “Switching
from a voice call to a video-phone call”.
☛
P55
● Switching from a voice call to a video-phone call
☛
P55