NTT docomo FOMA D701I, Manual

Page: 290 / 517

i-
α
pp
li
287
Displaying history when operation finishes without using saved data
Security Error History
When i-
α
ppli ended because an error that i-
α
ppli cannot use the saved data occurred , the name of
i- α ppli, date and time, cause of the security error is recorded.
･
Latest 20 records of security error history are recorded.
1
Press
m333
on the stand-by display.
■
Deleting all the history
a
Press
p
and select
Yes
.
Displaying i-
α
ppli detail information
Detail Info
Detail information such as the name and version of i- α ppli can be checked.
1
Hold down
d
for over a second on the stand-by display and select a folder.
2
Place the cursor i-
α
ppli to check and press
p
.
3
Check detail information.
･
The displayed items differ depending on i-
α
ppli.
･
If you press
p
, the site certificate can be checked when i- α ppli is downloaded from SSL pages.
Setting operating condition of i-
α
ppli
Settings
･
Only one i-
α
ppli application can be set for i-
α
ppli Stand-by Display.
･
i-
α
ppli Stand-by Display cannot be set while the stand-by ticker is displayed.
1
Hold down
d
for over a second on the stand-by display and select a folder.
2
Place the cursor at i-
α
ppli to set and press
m7
.
● Using i-
α
ppli to start another specified i-
α
ppli allows use of i-
α
ppli without returning to the software list. If
no i-
α
ppli to be started is set, selection of i-
α
ppli is required. If i-
α
ppli to be started is set but not on the
software list, it must be downloaded.
● Images used on i-
α
ppli or your entered data may automatically be sent to the server via Internet. Images
used on i-
α
ppli are images shot with the camera while i-
α
ppli is activated, images obtained using the
i-
α
ppli infrared communication function, images downloaded by i-
α
ppli from sites or Internet web pages, or
images obtained by i-
α
ppli from Data Box.
● For some i-
α
ppli, the IP (Information service provider) may access i-
α
ppli saved in the mobile phone and
may change into a use stop state directly. In this case, starting, setting for stand-by or upgrading, etc. of the
i-
α
ppli cannot be performed and only deleting and displaying the detailed information of software can be
performed. To use again, please ask the IP (Information service provider) since it is necessary to receive
communication of canceling to quit i-
α
ppli.
● For some i-
α
ppli, the IP (Information service provider) may send data to i-
α
ppli saved in the mobile phone.
● When the IP (Information service provider) requests to stop/restart i-
α
ppli or send data to i-
α
ppli, FOMA terminal
communicates and flashes. In this case, the communication charge is not required.
● For i-
α
ppli builders:
If i-
α
ppli does not operate normally while building, trace display may help. Press
m334
on
the stand-by display to display the trace. Note that trace information cannot be displayed if i-
α
ppli built to
record trace information is not saved.
Next