NTT docomo FOMA D701I, Manual

Page: 415 / 517

Data Co
mm
unic
a
tio
n
412
Checking operating environment
Use the communication configuration file and the
FOMA PC configuration software in the following
operating environments:
･
Note that utilization may not be possible in certain
operating environments. Furthermore, operation
will not be guaranteed in an environment other than
that described below and DoCoMo assumes no
responsibility for pertaining to operation under such
conditions.
･
The operation procedure for Windows XP is mainly
explained here. The screen display may differ under
other OS. Also, Windows 98 and Windows 98SE are
collectively shown as Windows 98.
*1 PC with a USB port (conform to USB specification 1.1/
2.0) is required in case of USB connection.
Before installation/uninstallation
･
Installing and uninstalling the communication
configuration file or FOMA PC configuration
software under Windows XP or 2000 can only be
performed by a user with administrator privileges.
Attempting by others user produces an error. For
details on PC administrator privileges, refer to the
instruction of the PC or contact your PC
manufacturer or Microsoft Corporation.
･
Before starting operation, make sure that no other
program is running. If there is any active program,
save and exit the program before operation.
Connecting PC to FOMA terminal
The connection should be made with the PC and
FOMA terminal both switched on.
･
Be sure to install the communication configuration
file (driver) before connecting with a PC in the
communication mode for the first time.
☛
P413
･
When FOMA terminal is connected with a PC in the
miniSD mode for the first time, the OS installs the
driver automatically. Installation of the
communication configuration file on a PC is not
required beforehand. However, the OS which
support the miniSD mode are Windows XP and
2000 only.
Selecting PC operation during USB connection
USB Mode Setting
Specify whether to perform data communication via
PC or operate the data of the miniSD memory card
attached to FOMA terminal from a PC at the time of
connection of PC and FOMA terminal.
1
Press
m654
on the stand-by
display.
2 Press
1
or
2
.
3
Select Yes .
Item Requirements
PC*
1 PC/AT compatible computer
OS The Japanese version of
Windows 98, Me, 2000, XP
Memory
requirements
Windows 98, Me: 32MB or more
Windows 2000: 64MB or more
Windows XP: 128MB or more
Hard disk capacity 5 MB or more free disk space
Default Communication mode
Communication mode
: In this mode, data communication is
performed from a PC.
miniSD mode
: In this mode, the miniSD memory card attached
to FOMA terminal is operated from a PC.
INFORMATION
● Even when FOMA terminal is connected with
PC, this function setting can be changed.
●
miniSD mode may not be set if the PC is set to
start data communication automatically when
FOMA terminal is connected.
●
When the miniSD memory card is being
operated from a PC, the mode cannot be set to
Communication mode . Also, miniSD mode cannot
be set during a call or i-mode.
●
When miniSD mode is set
･
If you format the miniSD memory card attached to
FOMA terminal from a PC, FOMA terminal may
not be disabled. It is advisable to format the
miniSD memory card on FOMA terminal.
☛
P337
･
USB Mode Setting is switched automatically to
communication mode in about 90 seconds after
the last access to the miniSD memory card
without connecting FOMA terminal to a PC.
･
Communication such as phone call or i-mode
can not be used.
･
The call indicator flashes.
･
Click on the task tray and click USB
大容量
記憶装置デバイス−ドライブ
(E:)
を安全に取
り外します
(Release safely the USB large
memory device-Drive E: *
2
) to quit operation of
the miniSD memory card.
*2 The character to be assigned to a drive
varies with the system of PC.
● The miniSD memory card folder structure during
operation from a PC.
☛
P330
Note: The miniSD memory card is not included in the bundle and needs to be purchased.
☛
P328