NTT docomo FOMA D701I, Manual

Page: 348 / 517

345
Display
ing/
Ed
itin
g/Man
a
gin
g
Da
ta
Making full use of infrared communication
Infrared communication
You can send and receive data to/from other FOMA terminals, mobile phones or PCs with an infrared
communication function. Also, by using the i-
α
ppli compatible with infrared communication, you can link
to devices having an infrared communication function.
･
Infrared communication is disabled while All Lock, PIM Lock, Lock on Close or Self Mode is set.
･
Infrared communication and USB connection cannot be performed at the same time.
･
Data prohibited from outputting from FOMA terminal cannot be sent/received. Note that the data whose file
restriction is set to
File restricted
with the same terminal and data in
Data transfer
folder are excluded.
･
During infrared communication, is indicated at the upper part of the screen and the terminal is in
data transfer mode (same status as outside the service area), so phone calls, i-mode connection and
data communication are disabled. Also, you cannot switch to other functions by pressing
b
.
･ The infrared communication function of this terminal conforms to IrMC 1.1.
･
Even if the terminal of the other party conforms to IrMC 1.1, some data may not be sent/received
depending on the data type.
･
The data including pictograms may not be displayed correctly when sent to other than i-mode terminal.
Even when sending to i-mode terminal, the data including pictogram 2 may not be displayed correctly
depending on the receiver’s terminal.
Using infrared communication
･
The folder name that was set by the other terminal may not be taken over even if you receive all items
of mail.
･
If you receive mail, usual mail may be stored in the folder for the Message i- α ppli in Inbox, Outbox or
Unsent messages.
･
Upon reception of all items of bookmark data, the data you will receive covers the entire of the folder
created by the other terminal.
･
When you receive bookmarks from any terminal other than D701i, the data may be stored in the top
folder.
･
If you receive images, video/i-motion or melodies from other than D701i, the data may be saved as
notes.
･
The receiver may not save a large size file of images, video/i-motion or melodies because of the
difference in the file size limit.
Notes in receiving the data from the other FOMA terminal via infrared communication
Notes in sending the data of D701i to the other FOMA terminal via infrared communication
The maximum communication range is
approximately 20 cm and the angle is
within 15 degrees from the center.
Keep the FOMA terminal pointing at the
remote device’s infrared data port and do
not move it until all the data have been
sent or received.
･
Infrared communication may not be
performed properly in areas of direct
sunlight or directly under fluorescent
lights.
Infrared data port
Within approx.
20 cm
15
゜
15
゜