NTT docomo FOMA D701I, Manual

Page: 452 / 517

Ch
aracter En
try
449
■
Deleting words
a
Place the cursor at a word to delete and
press
m
.
b
Select Delete .
･
To delete all, select
Delete all
.
3 Select
Word
field, enter the word to
register (up to 24 one-byte or 12 two-byte
characters).
･
The following character types can be
registered:
･
One-byte/two-byte alphabet
･
Hiragana/kanji
･
One-byte/two-byte katakana
･
One-byte/two-byte numeric
･
One-byte/two-byte symbol
･
Pictogram
4 Select
Reading
field and enter the reading
(up to 16 two-byte characters).
･
You can enter only hiragana.
5
Press
p
.
･
A confirmation screen is displayed when
editing registered words. Select Overwrite to
replace the original word. To register a new
word, keeping original word intact, select New .
You can select entered characters and register them
as a word.
1 Press
m5
on the character entry screen.
2 Place the cursor at the start point and press
o
.
･
To select the whole sentence, press
m o
.
Go to Step 4.
3
Place the cursor at the end point and press
o
.
The characters in the selected range is displayed
on Word field.
･
To select from the beginning to the start point,
press
m o
.
･
To select from the start point to the end, press
p o
.
4
Enter the reading and press
p
.
.
Entering characters using Slot Input
Method
Slot Input Method
You use
O
to select characters displayed on the
slot input board.
･
Slot Input Method must be set up before using this
function.
☛
P450
･
The predict conversion function cannot be used in
Slot Input Method.
･
When you are using the slot input board and want
to use the entry area (for deleting characters,
moving the cursor, etc.), press
a
. Press
a
again to use the slot input board.
Registering during character entry
INFORMATION
● Only words with a reading can be registered.
● Readings that contain characters other than
hiragana, prolonged sound, voiced sound or
semi-voiced sound characters cannot be
registered. Any blank spaces entered are
deleted when saved.
● When the same word is already registered in
the combination of a word and reading, the
word cannot be registered.
● Up to 5 words with the same reading can be
registered. To register additional words with the
same reading, change the reading of new words.
● If you register during character input, you can also
register by pressing
m61
on the
message text entry screen.
● For registration during character entry,
pressing
m5
in other than the message
text entry screen when no characters have
been entered causes the word edit screen to
appear immediately.
● When 200 words have already been registered,
the list of registered words is displayed.
To register a new item, you must either delete
a word from this list or edit a registered word.
Slot input board
Input mode
Entry area
Next