NTT docomo FOMA D701I, Manual

Page: 424 / 517

Data Co
mm
unic
a
tio
n
421
Just exiting the browser may not disconnect the
connection. To ensure disconnection, perform the
following operation:
1 Click in the task tray.
･
Double-click for Windows Me and 98.
2 Click 切断 (Disconnect).
Optimizing packet communication setup
The method of optimizing the PC packet
communication setup for FOMA network by means of
“W-TCP setup” and canceling optimization is
explained here.
The “W-TCP setup” is a “TCP parameter tuning tool”
for optimizing TCP/IP transmission capacity during
packet communication in the FOMA network. To
enable full use of the communication capability of
FOMA terminal, this communication set up is required.
System optimization can be performed for each
dialup connection.
1 Start
FOMA PC
設定ソフト
and click
W-
TCP
設定 ( W-TCP setup).
☛
P416
■
Starting from the task tray
a
Click .
2 Perform the following:
■
When the system has not been optimized
a
Click
最適化を行う
on the W-TCP
setting screen.
b
Select the dialup connection to be
optimized and click
実行 (Execute).
Optimization of the system settings and
dialup settings are performed respectively.
■
When the system has been optimized
The following screen is displayed. Make the
required settings if changes are to be made.
■
Deactivating optimization
a
Click
システム設定
(System setting) in
W-TCP
設定
(
ダイヤルアップ
) (Set W-TCP
(dialup)) screen.
The W-TCP setting screen is displayed.
b
Click
最適化を解除する
(Deactivate
optimization).
3 Reboot Windows, following the instruction
shown on the screen.
･
The settings take effect after rebooting the PC.
INFORMATION
● FOMA terminal displays a connecting screen when
you execute packet or 64K data communication.
The following screens are displayed when a
connection has been established:
●
The communication status is displayed on the
sub-display when FOMA terminal is closed.
●
The transmission speed displayed on your PC
may differ from actual speed.
●
Data transmission is available only with FOMA
terminal that was connected when the icon was
created.
● When connecting FOMA terminal other than D701i,
installation of the communication configuration file
for your FOMA terminal is needed.
Disconnecting
For Windows XP
Next