NTT docomo FOMA D701I, Manual

Page: 63 / 517

60
Makin
g
/R
eceivin
g
Calls
3
Press
p
.
■
Selecting a prefix when making an international call
Making a call by specifying a sub-address
Sub Address
Specify a sub-address to call a specific phone or communication device.
･
This setting is also used to select the contents in a video delivery service, “V-Live”.
1
Press
m877
on the stand-by display.
2
Press
1
.
･
To cancel the setting, press
2
.
Press
(
(sub-address delimiter) after the phone number, enter a sub-address and press
n
(for a
voice call) or
t
(for a video-phone call). Note that the sub-address needs to be set for the other party’s
terminal or communication device.
Setting the alarm indicating reconnection of the interrupted call
Reconnect Alarm
Sets an alarm that is heard at the time of reconnecting the voice call or video-phone call
interrupted by poor signal conditions in a tunnel or behind a building when signal conditions
improve.
･
The other party’s voice is not heard while signals are disrupted.
･
The time until the call is reconnected depends on line use or signal conditions. (The approximate time
is a maximum of 10 seconds.)
･ Note that the call is charged for the time until the call is reconnected (up to 10 seconds).
･
The call may be cut off before the alarm sounds depending on line use or signal conditions.
Default ON
How to call
INFORMATION
●
Even when Sub Address is ON , if a phone number begins with “ ” or an added prefix contains “ ”, the
digits after “ ” are not recognized as a sub-address and called as the number containing “ ”. To access
“V-Live”, enter the number including the first “ ”.
●
Even when Sub Address is ON , if “ ” is pressed after entering a pause or timed pause, it is not recognized
as a sub-address delimiter and sent as tone signals (DTMF) containing “ ”.
a
Enter a country code and then phone number on the stand-by
display.
b
Press
m3
and select
Prefix
field.
c
Select a prefix number to be used.
d
Press
m
and select Yes .