NTT docomo FOMA D701I, Manual

Page: 389 / 517

386
Ot
her Co
nven
ient
Fu
nct
ion
s
Setting to notify the limit of call cost
Call Cost Limit
Set the maximum limit of call cost and, when the total call cost exceeds the set amount, it is
notified with an alarm or icon.
･
The amount shown in Call Cost Limit is only an estimate and should not be regarded as the actual
amount for billing.
1
Press
m8442
on the stand-by display.
2
Enter the terminal security code and select each item to set.
3
Press
p
.
Removing the icon for the call cost
Remove Call Cost Icon
1
Press
m8443
on the stand-by display.
2
Enter the terminal security code and select
Yes
.
Default OFF
Alert ： Set whether to notify when the total call cost exceeds the set amount.
･
If
OFF
is set, the items below cannot be set.
Limit
：
Set the maximum amount of call cost (10 - 100,000 yen. 10 yen unit).
Alert method
：
Select the alarm with icon, or the icon only.
Alert sound ： Select an alarm sound from the melody list. Available when Sound + icon display is
selected in Alert method .
Alert time ： Specify how many seconds alarm sound should ring (1 - 60 sec.). Available when
Sound + icon display is selected in Alert method .
INFORMATION
●
If the call cost exceeds the maximum limit while talking or during communication, is displayed. When
FOMA terminal is closed, pressing
i
,
j
or
b
after talking or communication displays on the sub-
display.
●
When Sound + icon display is set for Alert method , the alarm sounds and message informing that the call
cost exceeds the maximum limit is displayed on the stand-by display after a call/communication.
●
The alert sounds at the ring alert volume set in Ring Volume Setting.
●
In Silent Mode, a message appears but the alarm does not sound if Sound + icon display is set for Alert
method . In Customize Silent Mode, however, the alarm sounds according to the ring alert volume set for
Customize Silent Mode.
●
Even if Sound + icon display is set for Alert method , neither the alarm sounds nor the message appears if:
･
In Driving Mode
･
When Lock on Close is active.
･
The call cost exceeds the limit while talking or during communication at 0 o'clock the first day of the
month when Reset Call Cost is set to ON .
●
If any key is pressed or FOMA terminal is closed while an alarm is sounding, the alarm sound stops. Also,
in case other functions are activated, the alarm sound stops.
●
Even if the UIM is replaced after Call Cost Limit is set to ON , the setting is retained.