NTT docomo FOMA D701I, Manual

Page: 48 / 517

45
Bef
o
re Usin
g D7
01i
■ Charging the battery in the desktop holder
･
When inserting FOMA terminal into the desktop holder, be careful not to put a strap in the holder.
Use the FOMA DC adapter 01 (optional) to charge the battery in a car. It can be used with negative
ground cars (both 12 V and 24 V).
･
For details, refer to the DC adapter manual.
a
Insert the cigarette lighter plug of the DC adapter into the cigarette lighter socket of the car.
b
Turn off FOMA terminal and open the external connection terminal cap.
c
Insert the DC adapter connector in firmly until it clicks.
d
Check that charging starts.
When charging is completed, remove the DC adapter connector from FOMA terminal while pressing the
release buttons on both sides of the connector, and remove the cigarette lighter plug from the cigarette
lighter socket. Then close the terminal cap.
a
Unfold the power plug from the AC
adapter and plug it into a 100V AC
outlet.
b
Insert the AC adapter connector in
the desktop holder until it clicks.
c
Insert FOMA terminal vertically into
the desktop holder and then tilt back.
d
Check that charging starts.
Check that the charge indicator lights in
red. When charging is completed, remove
FOMA terminal from the desktop holder
by tilting to front.
Charging in a car
INFORMATION
● The car battery may be discharged if you charge FOMA terminal with the engine off. Use the DC adapter
when the car engine is running.
● When not in use, remove the DC adapter from the cigarette lighter socket.
● The DC adapter fuses (DC adapter: 2A) are consumable items. New fuses are available at automotive
supply stores.
Charge indicator
Desktop
holder
Connector
( up)
AC
adapter
Power plug
100 V AC
outlet
Charge
indicator
Cigarette lighter plug
Cigarette lighter socket
DC adapter
Release button
Connector
( up)