TA600032-EN0/0
- 74 -
6.4.2
'General-purpose one-shot 1' signal (SHT1 pin)
"General-purpose one-shot 1" signal can be output from "SHT1" pin by writing "Operation Command" from "Local CPU" or
trigger signal input from "General-purpose input" pin.
"Delay time" (RSH1), "Pulse width" (RSHS.SHW1), and "Output logic" (RSHS.SHL1) can be set for "General-purpose one-shot
1" signal.
Item
Description
RSH1
Set the delay time until "General-purpose one-shot 1" signal is output.
"0" to "65535" can be set.
The output delay time is "(RSH1 - 1) × 100 μs".
There is an error that is up to 100 μs.
When "RSH1 = 0" is set, no pulse is output.
RSHS.SHW1
Set the pulse width of "General-purpose one-shot 1" signal (SHT1 pin).
"0" to "127" can be set.
The pulse width is "RSHS.SHW1 × 100 μs".
When "RSHS.SHW1 = 0" is set, no pulse is output.
RSHS.SHL1
Select the output logic of "General-purpose one-shot 1" signal (SHT1 pin).
0: Normally "H level". Outputs negative logic pulse by trigger.
1: Normally "L level". Positive logic pulse is output by trigger.
6.4.2.1
'SHT1' signal output by operation command
When "RENV2.TS1 = 00b" is set, a "General-purpose one-shot 1" signal can be output when writing the "CST1" (31h) operation
command.
The "General-purpose one-shot 1" signal is output from the "SHT1" pin according to the settings of the "RSH1" (0Eh) register
and the "RSHS" (10h) register.
Item
Description
RENV2.TS1
00b: "CST1" (31h) operation command
Trigger
One-shot
RSHS.SHW1
RSH1
RSHS.SHL1
