TA600032-EN0/0
- 55 -
5.2.3.7
RSH1 (14h) 'General-purpose one-shot 1' signal output delay time setting register
Set the delay time until "General-purpose one-shot 1" signal (SHT1 pin) is output.
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RSH1
Bit
Symbol
Description
15:0
RSH1
Set the delay time until "General-purpose one-shot 1" signal is output.
"0" to "65535" can be set.
The output delay time is "(RSH1- 1) × 100 μs".
There is an error that is up to 100 μs.
When "RSH1 = 0" is set, no pulse is output.
For details, see "6.4.2 'General-purpose one-shot 1' signal (SHT1 pin)".
5.2.3.8
RSHS (16h) General-purpose one-shot signals output setting register
Set the pulse width and output logic of general-purpose one-shot signals (SHT0, SHT1 pin).
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
SHL1
SHW1
SHL0
SHW0
Bit
Symbol
Description
6:0
SHW0
Set the pulse width of "General-purpose one-shot 0" signal (SHT0 pin).
"0" to "127" can be set.
The pulse width is "SHW0 × 100 μs".
When "SHW0 = 0" is set, no pulse is output.
For details, see "6.4.1 'General-purpose one-shot 0' signal (SHT0 pin)".
7
SHL0
Select the output logic of "General-purpose one-shot 0" signal (SHT0 pin).
0: Normally, by "H level", negative logic pulse is output by trigger.
1: Normally, by "L level", positive logic pulse is output by trigger.
14:8
SHW1
Set the pulse width of "General-purpose one-shot 1" signal (SHT1 pin).
"0" to "127" can be set.
The pulse width is "SHW1 × 100 μs".
When "SHW1 = 0" is set, no pulse is output.
For details, see "6.4.2 'General-purpose one-shot 1' signal (SHT1 pin)".
15
SHL1
Select the output logic of "General-purpose one-shot 1" signal (SHT1 pin).
0: Normally, by "H level", negative logic pulse is output by trigger.
1: Normally, by "L level", Positive logic pulse is output by trigger.
