TA600032-EN0/0
- 4 -
1.1.3
Notations
(1)
Negative logic pin names and negative logic signal names are not decorated with overline, etc.
For details on the logic, see "4.3 Pin list".
(2) "0" in bit description of registers indicates that only "0" can be written and only "0" can be read out.
(3)
The specific bit of status and register are shown as "status name. bit name" or "register name. bit name".
(For example, RADD.MONI represents the MONI bit in RADD register.)
(4)
If there is a description of time, the value at "Internal clock frequency = 40 MHz" is shown unless otherwise
specified.
(5)
Regarding the signal state of "ON" or "OFF", "H level" or "1" indicates "ON" in the case of positive logic.
"L level" or "0" indicates "ON" in the case of negative logic.
(6)
The numeric suffix "b" represents a binary number, and "h" represents a hexadecimal number.
No suffix is added to a decimal number.
Even if it is a binary or hexadecimal number, a suffix is not added in some graphs when the binary or hexadecimal
number is the same as the decimal number.
(7)
The range of consecutive bit positions is indicated by " : ".
(For example, MSTS [7:0] represents the 7th to 0th bits of MSTS.)
