Novus NHDR-4304AHD User Manual Download Page 89

Page: 89 / 124

NHDR

4xxxAHD user’s manual ver. 1.1

PLAYBACK OF RECORDINGS

Stream type

allows to select the

Mainstream

Substream

for playback. The number of channels

played simultaneously depends on the recorder model. To play the maximum available number of
channels, select the substream playback.

Note! Selecting the Mainstream, depending on the available hardware resources, some channels
may not be played. There will show the message "Resource not enough" in the channel window
that can not be played.

Channel selection

selection of channels for playback. Channels that do not have recordings are

grayed.

Video window

depending on the number of selected channels, the video window automatically

adjusts the division. By pressing the left mouse button on the window, this window is selected, the
channel is highlighted in the list, and the

icon appears in the line corresponding to the channel.

Navigation buttons:

determines the

range of the timeline

. The timeline covers a

range of

24 hours

2 hours

1 hour

30 minutes

. Switching

the range during playback displays the appropriate range of recordings. The currently played
moment becomes the beginning of a new range.

Displays the video window in full

screen mode.

Reverse playback

at an accelerated pace

(x2, x4, x8, x16).

Play forward in slow motion (x1/2, x1/4, x1/8, x1/16).

Starting playback.

Pause, pressing again displays the next frame.

Playing frame by frame.

Stop playback.

Play forward at an accelerated pace (x2, x4, x8, x16).

Digital zoom.

Creating a video clip.

Audio on / off. Adjusting the volume level.

Take a screenshot. The saved image has a displayed frame resolution.

Adds a default tag to the recording.

Adds a user

defined tag.

Summary of Contents for NHDR-4304AHD





























































































































Search results

Summary of Contents for NHDR-4304AHD

Reviews:

Novus NHDR-4304AHD, User Manual, Page: 89 / 124

Search results

Summary of Contents for NHDR-4304AHD

Reviews: