Novus NHDR-4304AHD User Manual Download Page 75

Page: 75 / 124

NHDR

4xxxAHD user’s manual ver. 1.1

SYSTEM SETTINGS

10.3. User account management

The recorder allows to configure 7 users accounts in the

System \ Multi

User

menu (one

administrator and 6 users with assigned rights).

Note! The default user is "admin". During the first start an access password have to be created.

Only the administrator account is active by default. Icons in the

User Edit

column allow to activate users,

change their name and enter their access password.

User Enable

enables / disables the selected user.

User Name

name of the user.

Password Enable

enables / disables login of the selected user using the access password.

Password Strenght

information about the security level of the entered password. It is updated while

entering the password in the next field. Password strength can be

Low

Medium

High

, indicated by red,

yellow or green color.

Password

the user's access password.

Confirm

a place to re

enter the user's access password.

Show Password

checkbox to display password characters instead of the mask.

Summary of Contents for NHDR-4304AHD





























































































































Search results

Summary of Contents for NHDR-4304AHD

Reviews:

Novus NHDR-4304AHD, User Manual, Page: 75 / 124

Search results

Summary of Contents for NHDR-4304AHD

Reviews: