Novus NHDR-4304AHD User Manual Download Page 65

Page: 65 / 124

NHDR

4xxxAHD user’s manual ver. 1.1

DEVICE MENU

9. DEVICE MENU

9.1. Disk management

The

Disk

submenu displays the list of hard disks connected to the recorder.

No.

the ordinal number of the disk. An asterisk (*) next to the number indicates disk is writing. The

checkbox next to the disk number should be marked to format it.

Edit

displays the disk edit window.

Model, Serial No, Firmware

disk informations.

Type

disk status:

(read/write),

(redundant),

(Read only).

Disk Group

defines the group the disk was assigned.

State

informs about the current state of the disk:

Unformatted

Full

Free / Total

the remaining and total hard disk space.

Free / Total Time

estimated time of recordings, which should be saved in the free disk space. The

time depends on the coding and number of video frames, video streams.

Overwrite

set to

Auto

, makes recordings overwritten starting with the oldest, when there is no free

disk space. When overwrite is turned

OFF,

the DVR will stop recording when the hard disk is full. It

is also possible to set the time when the recordings will be overwritten. Available periods are

1 day

days

7 days

14 days

30 days

60 days

and

90 days

. It defines the longest time of stored recordings,

after this time the recordings will be deleted.

Format HDD

format the hard drive. The checkbox next to the disk number should be marked.

Note! Formatting the hard disk is necessary to start recording. Formatting removes data from the
hard disk irretrievably.

Pressing the

Edit

button displays the disk editing window. The user can specify:

Disk type

. Available options:

Write / read

the option can be assigned within the write groups.

Redundant

this option can be assigned within redundant disk groups.

Read

only.

Disk group

selects the group where the hard disk is assigned.

Summary of Contents for NHDR-4304AHD





























































































































Search results

Summary of Contents for NHDR-4304AHD

Reviews:

Novus NHDR-4304AHD, User Manual, Page: 65 / 124

Search results

Summary of Contents for NHDR-4304AHD

Reviews: