manualshive.com logo in svg

Novus NHDR-4304AHD, User Manual, Page: 103 / 124

Share
Download
Novus NHDR-4304AHD User Manual Download Page 103

NHDR

-

4xxxAHD user’s manual ver. 1.1

 

All rights reserved © AAT Holding S.A. 

 

 

103

 

PLAYBACK OF  RECORDINGS

 

Device name

 

-

 detected media connected to the USB connector.

 

File Type

 

-

 filters the types of files to display. 

*.*

 means displaying all types of files, 

*.h264; * H264

, 

*.rf; *.RF

, 

*.avi; *.AVI

, 

*.mp4; * MP4

 displays files with the appropriate extension.

 

File  list

 

-

 a list of directories and files on the recognized medium. If the 

File  Type

 is other than 

*.*

, 

only files with a specific extension will be displayed.

 

Navigation buttons:

 

Below the navigation buttons is a timeline of the file.

 

Refresh button

 

-

 reads the file list again from the USB stick.

 

 

12.7. Playback 

-

 „Picture” tab

 

Photo  playback  mode  displays  a  list  of  photos  saved  on  the  recorder's  disk.  When  searching  for 
photos, enter the date, time period, type of events triggering the recording of the photo and channel 
number.

 

If there are more than 5000 images in the search conditions, the following message will appear.

 

  -

 Displays the video window in full

-

screen mode.

 

  -

 Play forward in slow motion (x1/2, x1/4, x1/8, x1/16).

 

  -

 Starting playback.

 

  -

 Pause, pressing again displays the next frame.

 

  -

 Playing frame by frame.

 

  -

 Stop playback.

 

  -

 Play forward at an accelerated pace (x2, x4, x8, x16).

 

  -

 Audio on / off. Adjusting the volume level.

 

Summary of Contents for NHDR-4304AHD





























































































































Reviews:

No comments