manualshive.com logo in svg

Novus NHDR-4304AHD, User Manual, Page: 58 / 124

Share
Download
Novus NHDR-4304AHD User Manual Download Page 58

NHDR

-

4xxxAHD user’s manual ver. 1.1

 

All rights reserved © AAT Holding S.A.

 

 

58

 

NETWORK SETTINGS

 

8.1. DDNS settings

 

DDNS is  a function that assigns a fixed domain name to  a dynamic  IP address.  Before connecting, 
make sure that the port is not used or blocked. Then enter the settings for the server, ie. 

Server name, 

domain, username, password.

 

DDNS

 

-

 enable the DDNS function.

 

Server

 

-

 selection of the DDNS server which has registered the domain.

 

Domain

 

-

 the name of the registered domain.

 

User

 

-

 username registered in the DDNS server.

 

Password

 

-

 user password.

 

Test

 

DDNS

 

-

 run the function check. If an error occurs in the connection, an error message will be 

displayed.

 

 

Before  starting  the  configuration,  please  register  the  address  in  one  of  the  DDNS  services 
supported by the recorder. The recommended service is 

www.dyndns.com

.

 

 

Before configuring the DDNS function, please contact the administrator of the network in order 
to obtain the permitted parameters that will be entered in this menu.

 

 

Note!  Despite  the  fact  that  the  recorder  enables  the  support  of  dynamic  IP  addresses,  it  is 
recommended to use DDNS function on the router which provides internet connection.

 

Summary of Contents for NHDR-4304AHD





























































































































Reviews:

No comments