manualshive.com logo in svg

Novus NHDR-4304AHD, User Manual, Page: 64 / 124

Share
Download
Novus NHDR-4304AHD User Manual Download Page 64

NHDR

-

4xxxAHD user’s manual ver. 1.1

 

All rights reserved © AAT Holding S.A.

 

 

64

 

NETWORK SETTINGS

 

8.5. RTSP streaming

 

The NHDR recorders are able to  send RTSP streams with the image of  AHD and  IP  cameras. The 

Network \ General \ Port Configuration 

menu shows how to get the RTSP streams.

 

The streaming configuration consists of the RTSP transmission port setting (it is recommended to use 
the default port 554).

 

To receive and display the RTSP stream, enter the access path in the player or application as follows:

 

rtsp://IP:Port/chA/B

   

rtsp://IP:Port/ipA/B

 

Where:

 

IP

 

-

 IP address of the recorder.

 

Port

 

-

 RTSP port (default 554).

 

A

 

-

 means channel number 01 (channel1), 02 (channel2), etc.

 

B 

-

 means the stream that we want to display: 0 (main stream), 1 (sub stream).

 

For example: 

rtsp://172.18.6.11:554/ch04/0

 opens the fourth analog channel (main stream) from the 

NHDR with the 172.18.6.11 IP address by 554 port.

 

Changing 

ch

 to 

ip

 in the path, the command opens IP channel.

 

For example: 

rtsp://172.18.6.11:554/ip04/0

 opens the fourth IP channel (main stream) from the 

NHDR with the 172.18.6.11 IP address by 554 port.

 

 

Note!  To  get  the  RTSP  stream  user  authentication  is  required  using  data  of  the  user  having   
access to the recorder. Permission for 

Remote Login 

and 

Live View

 of the channel is required.

 

Summary of Contents for NHDR-4304AHD





























































































































Reviews:

No comments