Novus NHDR-4304AHD User Manual Download Page 81

Page: 81 / 124

NHDR

4xxxAHD user’s manual ver. 1.1

SYSTEM SETTINGS

Load Settings

allows to load a file with the configuration of the device located on the flash

memory connected to the USB port. Pressing the button displays the explorer window to
indicate the file.

Note! Import and export requires administrator password authorization.

Upload

allows to upload the player to the recorder disk. The player will be automatically uploaded to a

DVD during archiving.

•

The

Auto Reboot

tab allows for periodic rebooting of the device (every day, week, month) for

maintenance.

Auto Reboot

enables / disables the function.

Time

defines the day and time of restart. When selecting the

Everyday

value, enter the time the restart

should happen. When selecting

Every Week

Every Month

, specify the time and moreover day of the

week or month.

10.5. IP Camera Management

The

System \ IP Camera Maintain

allows to manage Novus 2000 and 4000 series IP cameras

directly from the recorder menu, without logging in to them from a computer. The same operations
can be performed on Novus NVR 4000 series recorders and AHD recorders.

Entering the

IP Camera Maintain

menu, a table with IP channels connected to the recorder is

displayed. The individual columns show:

Channel

IP channel number.

IP Address

IP address of the connected camera or recorder which make available the stream of the

selected channel.

State

information about the operation status with the camera (

line

Off

line

Success

Failure

Software Version

the firmware version number of the connected device.

Summary of Contents for NHDR-4304AHD





























































































































Search results

Summary of Contents for NHDR-4304AHD

Reviews:

Novus NHDR-4304AHD, User Manual, Page: 81 / 124

Search results

Summary of Contents for NHDR-4304AHD

Reviews: